Calibration Support Messages

These messages may appear in a pop-up window during the calibration phase after a program is started. In some cases they prompt for operator action; in other cases they notify the operator of an abnormal condition.

C11: Cannot Calibrate Vision System
This message appears during calibration if the vision system cannot find the vision target. The program run is canceled when ABORT is clicked. Replace the v...
C36: Replace or Clean the Needle Cleaner Pad or Brushes
This message (optionally) appears when a scale-mounted needle cleaner or a clamp-type needle cleaner has been fully used. Clean or replace brushes or pads a...