DISK BOOT FAILURE, INSERT SYSTEM DISK AND PRESS ENTER
This message indicates a problem has occurred during dispenser boot up. The primary hard drive is unavailable or not selected as the first boot device.
To resolve this error:
- Inspect both the floppy disk drive and the USB port(s). They should be empty. Based on your findings, take the appropriate action:
- If a floppy disk is present in the floppy disk drive or a device is present in a USB port, remove them and press ENTER to continue the boot process. Then continue with step 2.
- If the drive and port(s) are empty, verify the Hard Disk Boot Priority is properly set according to the CMOS Set Up Procedure for P/N 2025-0064. Correct any errors and reboot the dispenser. Continue with step 2.
- If the disk boot failure message continues to display after taking the proper steps above, perform the Restore from Backup (Slave) Hard Drive procedure.