Automatic Fluid Dispensing Systems and Conformal Coating

Automatic Fluid Dispensing Systems and Conformal Coating

Full-featured Benchtop Robot, Automatic Fluid Dispenser, & Conformal Coating System - Live Demonstrations

GRAND JUNCTION, CO USA ― January 2019 ― GPD Global - manufacturer of precision fluid dispensing systems for high-volume 24/7, low-volume/high-mix, and R&D production - will exhibit in Booth 2915 at IPC APEX EXPO 2019 on January 29-31 in San Diego Convention Center.

Stop by Booth 2915 to see live demonstrations of machines and equipment. Experts will be there to discuss your production needs. Whether your project requires a pump for retrofitting or a fully automated dispense system, conformal coating, or component preparation, we have a solution for you.

Live Demonstrations of Benchtop Fluid Dispense Robot, Conformal Coating System, and High Precision Fluid Dispensing System machines and equipment

Benchtop Fluid Dispense Robot

Full-featured Benchtop Fluid Dispensing Robot

Full-featured Benchtop Dispense Robot - NEW heated work area with Underfill capability.

Conformal Coating System

Conformal Coating System with reservoirs and spray valve

Cost effective Conformal Coating System with Tilt and Rotate capability – NEW Advanced Spray Valve with tight edge definition and lowest possible overspray.

High Precision Fluid Dispensing System

Full-featured Benchtop Fluid Dispensing Robot

High Precision Dispensing System (MAX Series) – with capabilities for microelectronics and MEMs sensors.

Live Demonstrations of integrated pumps with controllers for time pressure dispensing, jetting, micro volume dispensing, volumetric dispense

Latest Dispense Technologies with Controllers for Integration

Full range of Latest Dispense Technologies with controllers for Integration:

  • New Time Pressure with FPC Dispensing – enhance manual process for better dispensing results
  • Jetting NCM5000 with Controller – Simplified Jetting
  • Precision Auger with Controller Micro Volume Dispensing down to 150 µm
  • Volumetric PCD pump with Controller – Volumetric dispense pump with total fluid control, great for viscosities 0-65,000 cps, Progressive Cavity Displacement Technology
Live Demonstrations of Precision Lead Former through-hole equipment for taped and bulk axial and radial leaded components.

Component Preparation for Through-Hole Applications

  • Axial Lead Forming System (CF-8): meets exacting military standards for axial taped or bulk components while eliminating component body stress. Consistent results for components being formed either vertically or horizontally.
  • Radial Lead Forming System (CF-9): forms and cuts 2- and 3-leaded taped components, capacitors, transistors, and LEDs. This system is designed to precisely and repeatedly form standard, as well as special formed lead configurations, with consistent ease.
  • Peel Back Force Tester (PBFT): used to measure the peel back force of carrier cover tape, supplies peel force data to ensure in-spec components reels are supplied for pick & place systems.

###

GPD Global is an equipment manufacturer of high quality, precision, automated fluid dispensing, conformal coating, & component-prep systems. International, state-of-the-art equipment supplier for PCB assembly and semiconductor industries. Design and manufacture wide variety of Automatic Fluid Dispensing & Conformal Coating Systems. We also manufacture SMT Cover Tape Peel Tester and Component Prep equipment for Thru-Hole applications.